OlympusDLH-1/DLH-2/DLH-3探头延迟块

DLH-3延迟块DLH-1/DLH-2/DLH-3延迟块|DLH-1/DLH-2/DLH-3探头延迟块|Olympus奥林巴斯DLH-1/DLH-2/探头延迟块

DLHT-1延迟块|奥林巴斯DLHT-1延迟块|DLH-1/DLH-2/延迟块价格|DLHT-1延迟块应用|OLYMPUS/DLHT-1延迟块

Olympus奥林巴斯DLHT-1探头延迟块|DLHT-1探头延迟块|Olympus/DLHT-1海如庆电子科技专业供应平台|DLHT-1可根据客户需求定制其他规格型号

延迟块探头

可更换延迟块探头是一种单晶接触式探头，专门与可更换的延迟块一起使用。

优势

•    强阻尼探头加上延迟块可以提供的近场分辨率。

•    较高的探头频率提高了分辨率。

•    直接接触法可提高测量薄材料及发现细小缺陷的能力。

•    具有外形吻合性能，适用于曲面工件。

应用

•    测厚。

•    垂直声束缺陷探测。

•    对接触区域有限的工件进行检测。

可更换延迟块探头

•    每个探头的配置都带有一个标准延迟块和 一个固定环。

•    备有高温延迟块和干耦合延迟块。

•    探头及延迟块端部之间需要耦合剂。

Sonopen可更换延迟块探头

装有弹簧的支架SLH-V260-SM*      *仅与V260-SM一起使用。

• 聚焦的可更换延迟块。

• 直径极小的特点可以提高在曲面及小缺口上的检测性 能。

• 手柄可以方便探头头部的定位。

可更换延迟块探头选项

* 高温延迟块可在温度高达175°C（350°F）的情况下使用。

带有手柄组合件的*延迟块探头

这些探头用于伸到空间极其狭小的区域进行探测，如： 相距很近的涡轮叶片。探头可旋转的头部提高了 其在狭小区域接触被测工件的能力。

可更换延迟线探头是一款单晶Videoscan探头，其外壳可连接一条可更换延迟线。

Advantages:

• Heavily damped transducer combined with the use of a delay line provides excellent near surface resolution
• Higher transducer frequency improves resolution
• Improves the ability to measure thin materials or find small flaws while using the direct contact method
• Contouring available to fit curved parts

Applications:

• Precision thickness gaging
• Straight beam flaw detection
• Inspection of parts with limited contact areas
• Replaceable Delay Line Transducers
• Each transducer comes with a standard delay line and retaining ring
• High temperature and dry couple delay lines are available
• Requires couplant between transducer and delay line tip

Delay Line Transducers

Replaceable Delay Line Options 

Sonopen® Replaceable Delay Line Transducer

• Focused replaceable delay line
• Extremely small tip diameter may improve performance on curved surfaces and small indentations
• Handle for easier positioning of transducer head

Harisonic Pencil Transducers

These high frequency, focused delay line transducers are compatible with any ultrasonic instrument capable of displaying a return echo at depths as low as .010 inches in steel. The typical range is approximay from .010 inches to 0.250 inches in steel. The 0.060 inches circular contact face enables readings to be taken on curved surfaces. Typical applications for these transducers include the inspection of turbine blades, small diameter tubing and concave areas in small parts. Both transducers utilize replaceable delay tips. For best performance, a short cable (such as MB type, 6') should be used. These models, indicated by a part number ending with an "L", incorporate PowerLink™ Technology to assure optimal performance when used with a Sonic ultrasonic instrument. 

The HC-876 ultrasonic transducer operates at high frequency (20 MHz) with a broad bandwidth and small contact surface. Its chief application is thickness measuring of critical components such as jet engine blades. It is fitted with a Microdot connector.

HC-398-RDL-L Straight Handle

HC-398-RA-RDL-L Right Angle Handle

HC-876-L Straight Handle

HC-876-RA-L Right Angle Handle

HC-876*Right Angle Handle